An easy to apply, passive filter capable of reducing Variable Speed Drive (VSD) / Variable Frequency Drive (VFD) harmonics by up to 10 times with none of the inherent problems of conventional filters. The Mirus Lineator also provides a bidirectional harmonic mitigation protection to help block Line Side Voltage Distortion from interfering with the VFD/VSD/Load Device Operation. The Lineator is also appropriate for application on Linear Loads that need to be protected from Line Side Voltage Commutations and Recovery Transient event. Available in traditional
3 Phase - Lineator design, Single Phase 1Q3 Design, and as a Auto Transformer/ Isolation Transformer
Design AutoTrans Lineator. See literature links on the right side of the page.
*Treats all major harmonics generated by Variable Speed Drives and other 3-phase Rectifier Loads.
*Exceeds 18-pulse performance in a smaller footprint, with lower installed and operating costs.
*Easily applied to the input of a single VSD or Distribution Multiple VSD Lineups (Integrated Drive Centers)
*No need to phase shift against other VSDís.
*Will meet or exceed IEEE 519 standard for both current and voltage distortion
*Input current demand distortion < 8% over entire operating range
*Compatible with engine generators since capacitive reactance is < 15% of rated kVA even under light loads.
*Will not resonate with other power system components.
*Will not be overloaded by other line side harmonic sources.
*Suppresses overvoltages caused by capacitor switching and other fast changing loads.
*Eliminates need for drive isolation transformers, AC line reactors and DC link chokes
*Removal of harmonics improves overall system power factor.
*Saves energy by reducing upstream harmonic losses while operating at > 99% efficiency
*Reduces DC bus ripple and increases ride-through capability of the load.
AutoTrans Lineatorô ATL
33427 Mayer Rd
Waller, TX 77484
Phone: (877) 898-5103